Kunden Login
• REES Steps and Walking gratings
For safe walking on metal roofs, for example, for servicing and controlling purposes. Completely available in the proven clamp system with gutter or stamped gratings in different materials.
Our clamp holders for steps and walking gratings can be installed on standing seam roofs, and also on roofing like Kalzip, Bemo or RibRoof without damage to the roofing.
Most of our clamp holders available in our product range comply with the European norm EN 516-1.
As a special design it is possible to produce broader walking gratings as well as (with low roof pitch) walking gratings parallel to the roof pitch.
• REES Steps and Walking gratings on standing seams
Steps and walking gratings will be mounted regulary crosswise to the roofpitch on the standings seams. Our Clampholder is available in three executions for roofpitches up to 40 ° degree.
Gutterboard or stamped gratings with a width of 25 cm can be mounted on the clampholder.
With assembled gratings you get a long walking grating, for example under rooflights or collector mountings, but also to chimneys or ventilating systems.
REES Clampholder for steps and walking gratings on standing seam roofs
Clamp holder for steps and walking gratings, adjustable for roof pitch of 20 - 40 degrees. To mount on standing seams, for gratings with a width up to 30 cm. According to euro-standard EN 516-1 certified.
| Execution | Art.-No. |
| Aluminium | LA-1620 |
| Copper | LA-1621 |
| Stainless steel A2 | LA-1622 |
For the assembly on standing seam roofs, for grating widths up to 300 mm. According to euro-standard EN 516-1.
| Execution 0 - 10 degrees | Art.No. |
| Aluminium | LA-1600 |
| Copper | LA-1601 |
| Stainless steel (A2) | LA-1602 |
| Execution 10 - 20 degrees | Art.No. |
| Aluminium | LA-1610 |
| Copper | LA-1611 |
| Stainless steel (A2) | LA-1612 |
For roof pitches below 5 degree you can also mount walking gratings parallel to the roof pitch. For this purpose, we can offer you specially designed parts.
Clamp holder to mount walking gratings parallel to standing seams.
Special designed. Set with two brackets and a angle steel in the lenght
of the distance between the seams.
| Execution | Art.No. |
| Aluminium | LA-1640 |
• REES steps and walking gratings on industrially made roofings
For industrially made roofings like Bemo, Domico, Kalzip or RibRoof we offer also steps and walking gratings in various designs for roof pitches up to 40 degrees.
Gutterboard gratings or sheet steel stamped gratings with an width of 25 cm will be mounted on the clampholder.
With assembled gratings you get a long walking grating, for example under rooflights or collector mountings, but also to chimneys or ventilating systems.
REES Clamp holder for steps and walking gratings
on industrially made roofings:
Clamp holder for steps and walkig gratings on industrially made roofings.
Adjustable from 0 - 20 degrees or 20 - 40 degrees. For gratings with and width
of max. 30 cm. According to euro-standard EN 516-1 certified.
| Various designs | Art.No. | |
| "Round head" (Bemo, Kalzip) | Alu 0 - 20 degree | LA-1520 |
| "Round head" (Bemo, Kalzip) | Alu 20 - 40 degree | LA-1521 |
| REES 465 (RibRoof 465, Domico) | Alu 0 - 20 degree | LA-1050 |
| REES 500 (RibRoof 500) | Alu 0 - 20 degree | LA-1055 |
Brackets for steps and walking gratings on trapezoid roofings.
Special designed following the wishes of our customers. For roof pitches up to 25 degrees.
With a sealing tape at the underpart.
| Execution | Art.-No. |
| Aluminium | LA-1630 |
• REES Special designed parts
For standing seam roofs and also for industrially made roofings it is possible for us to make special designs for bigger widths of the gratings.
Execution:
For standing seam roofs:
- Aluminium
- Copper
- Stainless Special Steel 1.4301
On industrially made roofings
- Aluminium
We can make you a special offer for brackets up to a grating-width of 80 cm.
• Gratings and accessories
Gutterboard gratings and accessories
Gutter board grating,
in anti-skid design
mesh width 30 x 30 mm,
bearing bar 25 / 2 mm.
Width 25 cm, various lenght.
| Various executions | Dimension | Art.No. |
| Zinc coated steel | 800 x 250 | LA-1211 |
| Zinc coated steel | 1.600 x 250 | LA-1212 |
| Zinc coated steel | 3.000 x 250 | LA-1213 |
| Stainless spec. steel | 800 x 250 | LA-1263 |
| Stainless spec. steel | 1.600 x 250 | LA-1267 |
| Stainless spec. steel | 2.000 x 250 | LA-1270 |
• please ask for more dimensions and executions.
in anti-skid design
mesh width 30 x 90 mm,
bearing bar 25 / 2 mm.
Width 25 cm, various lenght.
| Execution | Dimension | Art.No. |
| Copper | 800 x 250 | LA-1237 |
| Copper | 1.600 x 250 | LA-1240 |
| Copper | 3.200 x 250 | LA-1243 |
| Aluminium | Special desinged | LA-1215 |
• please ask for more dimensions and executions
Accessoires for gutterboard gratings:
Assembly clamps
to mount the gratings on our clamp holders, with high-grade steel screw and nut. For mesh size 30 mm, width approx. 18 mm.
Executions in galvanized steel or high-grade steel.
Grating Connectors
For the assembly of continuous gratings, to connect the above shown gratings.
Execution in galvanized steel or high-grade steel.
Sheet steel stamped gratings and accessories
Sheet steel stamped grating
with anti-skip surface. Width 25 cm, various lengths.
| Execution | Dimension | Art.No. |
| Zinc coated steel | 800 x 250 | LA-1220 |
| Zinc coated steel | 1.500 x 250 | LA-1223 |
| Zinc coated steel | 3.000 x 250 | LA-1227 |
| Copper | 800 x 250 | LA-1247 |
| Copper | 1.500 x 250 | LA-1250 |
| Copper | 3.000 x 250 | LA-1257 |
• please ask for other material, dimension or colours.
Accessories for sheet steel stamped gratings:
Screws in stainless special steel
to mount the sheet steel stamped gratings on our clampholders and brackets.
Incl. nuts and shim.
Grating Conectors
for the assembly of sheet metal stamped gratings.
Execution in galvanized steel or stainless special steel